Online CWNP CWAP-404 Practice Test - Accessible Through All Famous Browsers

P.S. Free & New CWAP-404 dumps are available on Google Drive shared by TestPassKing: https://drive.google.com/open?id=1uw-9LNuV2c35zv2o0HsTRgmMnS5Gb-hL

Our CWAP-404 practice questions are undetected treasure for you if this is your first time choosing them. These advantages help you get a thorough look in details. First of all, the price of our CWAP-404 exam braindumps is reasonable and affordable, no matter the office staffs or the students can afford to buy them. Secondly, the quality of our CWAP-404 Study Guide is high. You can just look the pass rate of our CWAP-404 training quiz, it is high as 98% to 100%.

CWNP CWAP-404 Exam Topics:

Section	Objectives
Protocol Analysis - 15%
Capture 802.11 frames using the appropriate methods	- Select capture devices Laptop protocol analyzers APs, controllers, and other management solutions Specialty devices (hand-held analyzers and custom-built devices) - Install monitor mode drivers - Select capture location(s) - Capture sufficient data for analysis - Capture all channels or capture on a single channel as needed - Capture roaming events
Understand and apply the common capture configuration parameters available in protocol analysis tools	- Save to disk - Packet slicing - Event triggers - Buffer options - Channels and channel widths - Capture filters - Channel scanning and dwell time
Analyze 802.11 frame captures to discover problems and find solutions	- Use appropriate display filters to view relevant frames and packets - Use colorization to highlight important frames and packets - Configure and display columns for analysis purposes - View frame and packet decodes while understanding the information shown and applying it to the analysis process - Use multiple adapters and channel aggregation to view captures from multiple channels - Implement protocol analyzer decryption procedures - View and use a capture’s statistical information for analysis - Use expert mode for analysis - View and understand peer maps as they relate to communications analysis
Utilize additional tools that capture 802.11 frames for analysis and troubleshooting	- WLAN scanners and discovery tools - Protocol capture visualization and analysis tools - Centralized monitoring, alerting, and forensic tools
Ensure appropriate troubleshooting methods are used with all analysis types	- Define the problem - Determine the scale of the problem - Identify probable causes - Capture and analyze the data - Observe the problem - Choose appropriate remediation steps - Document the problem and resolution
Spectrum Analysis - 10%
Capture RF spectrum data and understand the common views available in spectrum analyzers	- Install, configure, and use spectrum analysis software and hardware - Capture RF spectrum data using handheld, laptop-based, and infrastructure spectrum capture solutions - Understand and use spectrum analyzer views Real-time FFT Waterfall, swept spectrogram, density, and historic views Utilization and duty cycle Detected devices WLAN integration views
Analyze spectrum captures to identify relevant RF information and issues	- RF noise floor in an environment - Signal-to-Noise Ratio (SNR) for a given signal - Sources of RF interference and their locations - RF channel utilization - Non-Wi-Fi transmitters and their impact on WLAN communications - Overlapping and non-overlapping adjacent channel interference - Poor performing or faulty radios
Analyze spectrum captures to identify various device signatures	- Identify various 802.11 PHYs DSSS OFDM OFDMA Channel widths Primary channel - Identify non-802.11 devices based on RF behaviors and signatures Frequency hopping devices IoT devices Microwave ovens Video devices RF Jammers Cordless phones
Use centralized spectrum analysis solutions	- AP-based spectrum analysis - Sensor-based spectrum analysis
PHY Layers and Technologies - 10%
Understand and describe the functions of the PHY layer and the PHY protocol data units (PPDUs)	- DSSS (Direct Sequence Spread Spectrum) - HR/DSSS (High Rate/Direct Sequence Spread Spectrum) - OFDM (Orthogonal Frequency Division Multiplexing) - ERP (Extended Rate PHY) - HT (High Throughput) - VHT (Very High Throughput) - HE (High Efficiency) HE SU PPDU HE MU PPDU HE ER SU PPDU HE TB PPDU HE NULL data packets
Apply the understanding of PHY technologies, including PHY headers, preambles, training fields, frame aggregation, and data rates, to captured data
Identify and use PHY information provided within pseudo-headers in protocol analyzers	- Pseudo-Header formats Radiotap Per Packet Information (PPI) - Key pseudo-header content Guard intervals Resource units allocation PPDU formats Signal strength Noise Data rate and MCS index Length information Channel center frequency or received channel Channel properties
Recognize the limits of protocol analyzers to capture PHY information including NULL data packets and PHY headers
Use appropriate capture devices based on proper understanding of PHY types	- Supported PHYs - Supported spatial streams
MAC Sublayer and Functions - 25%
Understand frame encapsulation and frame aggregation	- Frame aggregation (A-MSDU and A-MPDU)
Identify and use MAC information in captured data for analysis	- Management, Control, and Data frames - MAC frame formats and contents Frame Control field To DS and From DS fields Address fields Frame Check Sequence (FCS) field - 802.11 Management frame formats Information Elements Authentication Association and Reassociation Beacon Prove Request and Probe Response - Data and QoS Data frame formats - 802.11 Control frame formats Acknowledgement (ACK) Request to Send/Clear to Send (RTS/CTS) Block Acknowledgement and related frames Trigger frames VHT/HE NDP announcements Multiuser RTS
Validate BSS configuration through protocol analysis	- Country code - Minimum basic rate - Supported rates and coding schemes - Beacon interval - WMM settings - RSN settings - HT/VHT/HE operations - Channel width - Primary channel - Hidden or non-broadcast SSIDs
Identify and analyze CRC error frames and retransmitted frames
WLAN Medium Access - 10%
Understand 802.11 contention algorithms in-depth and know how they impact WLANs	- Distributed Coordination Function (DCF) Carrier Sense (CS) and Energy Detect (ED) Network Allocation Vector (NAV) Contention Windows (CW) and random backoff Interframe spacing - Enhanced Distributed Channel Access (EDCA) EDCA Function (EDCAF) Access Categories and Queues Arbitration Interframe Space Number (AIFSN) - Wi-Fi Multimedia (WMM) WMM parameters WMM-Power Save WMM-Admission Control
Analyze QoS configuration and operations	- Verify QoS parameters in capture files - Ensure QoS is implemented end-to-end
802.11 Frame Exchanges - 30%
Capture, understand, and analyze BSS discovery and joining frame exchanges	- BSS discovery - 802.11 Authentication and Association - 802.1X/EAP exchanges - Pre-Shared Key authentication - Four-way handshake - Group key exchange - Simultaneous Authentication of Equals (SAE) - Opportunistic Wireless Encryption (OWE) - WPA2 and WPA3 - Fast secure roaming mechanisms Fast BSS Transition (FT) roaming exchanges Pre-FT roaming exchanges - Neighbor discovery (802.11k/v) - Hotspot 2.0 protocols and operations from the client access perspective ANQP Initial access
Analyze roaming behavior and resolve problems related to roaming	- Sticky clients - Excessive roaming - Channel aggregation for roaming analysis
Analyze data frame exchanges	- Data frames and acknowledgement frames - RTS/CTS data frame exchanges - QoS Data frame exchanges - Block Acknowledgement exchanges

>> Training CWAP-404 For Exam <<

Pass-Sure Training CWAP-404 For Exam & Passing CWAP-404 Exam is No More a Challenging Task

Learn the importance of self-evident, and the stand or fall of learning outcome measure, in reality of hiring process, for the most part through your grades of high and low, as well as you acquire the qualification of how much remains. Therefore, the CWAP-404 practice materials can give users more advantages in the future job search, so that users can stand out in the fierce competition and become the best. Actually, just think of our CWAP-404 Test Prep as the best way to pass the exam is myopic. They can not only achieve this, but ingeniously help you remember more content at the same time.

CWNP Certified Wireless Analysis Professional Sample Questions (Q45-Q50):

NEW QUESTION # 45
During a VHT Transmit Beamforming sounding exchange, the beamformee transmits a Compressed Beamforming frame to the beamformer. What is communicated within this Compressed Beamforming frame?

A. Beamformee Matrix
B. Feedback Matrix
C. Steering Matrix
D. Beamforming Matrix

Answer: B

Explanation:
Explanation
The beamformee transmits a Feedback Matrix within the Compressed Beamforming frame to the beamformer.
The Feedback Matrix contains information about the channel state between the beamformee and each spatial stream of the beamformer. This information is used by the beamformer to adjust its transmit weights and optimize its signal for the beamformee34. References: CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4033; CWAP-404 Certified Wireless Analysis Professional Study and Reference Guide, Chapter 11: 802.11n/ac/ax PHYsical Layer Frame Exchanges, page 4064.

NEW QUESTION # 46
What is an AIFS?

A. A form of aggregation performed at the PHY layer based on 802.lie UP values interpreted from DSCP values
B. The shortest period of time a STA can sleep
C. A variable Interframe Space introduced by 802.lie to help prioritize medium access for different Access Categories
D. A medium access method introduced by 802.lln, but never implemented

Answer: C

Explanation:
Explanation
An AIFS is a variable interframe space introduced by 802.11e to help prioritize medium access for different Access Categories (ACs). An interframe space is a period of time that a STA (station) has to wait before attempting to access the medium. An AIFS is a type of interframe space that varies depending on the AC of the traffic. An AC is a logical queue that corresponds to a QoS (Quality of Service) level for different types of traffic. There are four ACs defined by 802.11e: AC_VO (Voice), AC_VI (Video), AC_BE (Best Effort), and AC_BK (Background). Each AC has a different AIFSN (Arbitration Interframe Space Number) value, which determines how long it has to wait before attempting to access the medium. A lower AIFSN value means a higher priority and a shorter waiting time. The other options are not correct, as they do not describe what an AIFS is. An AIFS is not a medium access method introduced by 802.11n, but never implemented, as it is part of the 802.11e standard and widely used in QoS-enabled WLANs. An AIFS is not a form of aggregation performed at the PHY layer based on 802.11e UP values interpreted from DSCP values, as aggregation is a technique that combines multiple frames into one larger frame to improve efficiency and throughput, not prioritization or medium access. An AIFS is not the shortest period of time a STA can sleep, as sleeping is a power saving mode that allows a STA to conserve battery power by periodically turning off its radio, not accessing the medium. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 7: QoS Analysis, page 194-195

NEW QUESTION # 47
Finish the statement:
It is possible to distinguish between_______22 MHz transmissions and________20 MHz transmissions when looking at an FFT plot.

A. HT and VHT
B. HR/DSSS and ERP
C. ERP and VHT
D. OFDM and HT

Answer: D

Explanation:
Explanation
It is possible to distinguish between OFDM 20 MHz transmissions and HT 20 MHz transmissions when looking at an FFT plot. OFDM and HT are two different modulation schemes used by 802.11 WLANs. OFDM is used by legacy 802.11a/g devices, while HT is used by newer 802.11n/ac devices. OFDM and HT have different spectral characteristics that can be observed on an FFT plot. OFDM transmissions have a flat spectrum with sharp edges, while HT transmissions have a tapered spectrum with rounded edges. This is because HT uses guard intervals and cyclic prefixes to reduce inter-symbol interference and improve performance. The other options are not correct, as they do not describe different modulation schemes or channel widths that can be distinguished on an FFT plot. References: [Wireless Analysis Professional Study Guide CWAP-404], Chapter 3: Spectrum Analysis, page 70-71

NEW QUESTION # 48
When 802.11 standard compliant AES-CCMP security is being used with IPSec/ESP for layered security, what will a WLAN protocol analyzer see as the security mechanism in use when a user browses to an HTTPS secured web page?

A. AES-CCMP and IPSec/ESP
B. SSLv3
C. AES-CCMP
D. IPSec/ESP
E. AES-CCMP, IPSec/ESP, AND SSLv3

Answer: C

NEW QUESTION # 49
Given: Before installing a Wi-Fi network, ABC Company performed a spectrum analysis looking for problems. The 2.4 GHz RF spectrum looked like Image-A. After installing an ERP WLAN, ABC Company performed another spectrum analysis during business hours. The 2.4 GHz RF spectrum then looked like Image-B close to an AP on channel 1.

Now the 2.4 GHz RF spectrum looks like Image-C and access points and clients can no longer communicate on channel 1. What is happening on channel 1?

A. The shape of the signals in images B and C indicates that a licensed user in this frequency range has enabled the "guard bands" in an effort to restrict local interference with other systems.
B. A high-power, narrowband RF interference source on channel 1 is causing the CCA energydetects(ED) function on 802.11 devices to indicate a busy medium because the signal source is above the ED threshold.
C. The access point's antenna connectors have been tampered with, causing "spike and shear" RF transmissions that are not compatible with the OFDM PHY format. For that reason, client devices cannot receive the AP's transmissions without error.
D. Stronger transmissions from licensed 2.4 GHz users, such as HAM operators, are compressing the transmissions from the channel 1 access points into the lower portion of the band.
E. Detection of a DFS radar event has discontinued 802.11 operation on channel 1, but the access point's Channel Switch Announcement frame cannot be sent due to the presence of radar.

Answer: B

NEW QUESTION # 50
......

If you want to make one thing perfect and professional, then the first step is that you have to find the people who are good at them. In this CWAP-404 exam braindumps field, our experts are the core value and truly helpful with the greatest skills. So our CWAP-404 practice materials are perfect paragon in this industry full of elucidating content for exam candidates of various degrees to use for reference. Just come to buy our CWAP-404 study guide!

CWAP-404 Torrent: https://www.testpassking.com/CWAP-404-exam-testking-pass.html

What's more, part of that TestPassKing CWAP-404 dumps now are free: https://drive.google.com/open?id=1uw-9LNuV2c35zv2o0HsTRgmMnS5Gb-hL

Ed Lane Ed Lane

Biography

Online CWNP CWAP-404 Practice Test - Accessible Through All Famous Browsers

CWNP CWAP-404 Exam Topics:

Protocol Analysis - 15%

Spectrum Analysis - 10%

PHY Layers and Technologies - 10%

MAC Sublayer and Functions - 25%

WLAN Medium Access - 10%

802.11 Frame Exchanges - 30%

Pass-Sure Training CWAP-404 For Exam & Passing CWAP-404 Exam is No More a Challenging Task

CWNP Certified Wireless Analysis Professional Sample Questions (Q45-Q50):

Join Our Community